- Brown Paper or Butcher Paper
- Bubble pack or air fill
- Cellulose Wadding
- Corrugated Plastic (Coroplast®)
- Foam board, Fomecor®
- Foam Sheeting
- Gator Foam® and Gator Board®
- Loose fill
- Packing blanket
- Plastic sheeting or Polyethylene sheeting
- Polyester Batting
- Polyester Felt
- Polyethylene Foam
- Polypropylene (Propafoam®)
- Polypropylene Foam Wrap
- Polypropylene wrap
- Polystyrene, Styrofoam®
- Polyurethane Ester Foam
- Polyurethane Ether Foam
- Polyurethane Foams
- Quilted Paper
- Shrink-wrap or Stretch wrap
- Silicone Release Paper
- Soft Tyvek®
- Synthetic Fibers
- Tissue Paper, Buffered Tissue, Acid Free Tissue
The following list contains materials used to wrap, pack and protect your specialty freight. By using only the finest materials available, Arrow Express has set the standard when it comes to packing your valuables for safe transport.
Very inexpensive; good utility wrap, absorbs moisture; can be easily recycled.
Comes in single- or double-wall sheeting. Air is injected into circles (1/4 to 2 inches in diameter) and then sealed. It provides cushioning. It is waterproof and layers can be built up for protection. It can be recycled in some areas, and some of it is made from recycled plastic.
Cardboard comes in many forms: corrugated, flat, rolled, single wall, double wall, triple wall, and boxes. Most cardboard is corrugated layers with a paper lining on at least one side. Wall refers to the number of layers of corrugation. Test refers to the amount of pressure per square inch the material will withstand without puncturing. (The most common is 200 or 275 test.) It is excellent for using as a protective barrier for objects. It can be cut or scored with a knife to create almost any shape; it absorbs moisture and can be coated to minimize absorption. It is very strong and can be bought in ready-made cartons that are excellent for packing objects when filled with a cushioning material.
Layers of soft tissue like paper, has good cushioning qualities, especially when used in layers; inexpensive and can be recycled with paper.
A corrugated plastic that is available in 100, 200, 300 and 400 pound densities. It is a rigid inert material that can be formed into boxes suitable for storage and transit. It is an excellent backing material for paintings and framed works on paper and far superior to conventional foam core backings. This material, due to its puncture resistant qualities, is often used to cover the open space in transit frames.
This is a nylon film that has no surface coatings; it is softer than Mylar or glassine, and is capable of absorbing up to 10% or its weight in moisture. Dartek® is a good replacement for glassine when wrapping paintings that are susceptible to tackiness and abrasion.
Soft, cloth material, which is good for delicate surfaces. 100% cotton is most desirable; most colors are not colorfast and should be washed before using. Cotton felt absorbs liquids and humidity. It can be used as a liner for foam padding.
A closed-cell foam between two skins of paper material available in both archival and non-archival. The non-archival is the most readily available. It is very rigid and can be cut with a knife. It is not recyclable. Fome-Cor brand (International Paper Co.) is a version with an acid-free polystyrene core. Although the core is acid-free, the paper is made from wood fiber, which may become acidic over time.
All foam products are environmentally unsound because of manufacturing process, but there are no good substitutes at this point. All foams put off toxic gasses when heated. Avoid cutting with a hot wire or heating gun. The use of hot glue does not seem to cause off gassing, but should be done in a well ventilated area.
A lightweight structural panel made of a rigid polystyrene foam core with moisture resistant, man-made wood fiber veneer exterior. It is available in 3/16 to 1½ inch thicknesses. It is not an archival material.
A paper product used primarily for interleaving between prints or drawings, because it has a neutral ph factor. It is available in rolls or flat sheets. It has a definite shelf life of three to five years.
A barrier laminate with polyester felt on one side and Teflon on the other. It is impermeable to liquids such as water, yet it transmits moisture and other vapors, making it ideal for art humidification. The porous quality of the membrane allows for the release of vapors while restricting the passage of larger molecules of the same compound (creates a moisture barrier while allowing the object to breathe). It is excellent for wrapping objects and lining cavities. It has an extremely slick surface and is very durable. It is an excellent material to use against larger or heavier items that have extremely fragile surfaces.
A spunbonded polyester fabric that is lightweight yet strong, lint-free with no pigments or binders. It has a very smooth surface. It is used as a release and interleafing paper.
Extruded polystyrene chips or "peanuts" are available in different shapes that mesh together; are used loosely in a container and packed around an object. They need to be packed tightly around the object, and the container should be shaken to get the fill to mesh correctly as objects tend to shift to the bottom of the container. They are available in a variety of sizes, can be reused, and work well for filling voids. While they give overall support, there is a limitation to how much weight they can support. They are very unsound environmentally and are not biodegradable. Vegetable starch peanuts with names like "ECO-Fill" are the biodegradable answer to polystyrene peanuts. They are made of vegetable starches and water and can actually be eaten. They are water soluble and work the same as the peanuts for filling voids, giving overall support. This is a material that should be used more widely and could replace polystyrene.
An aluminized nylon and polyethylene barrier film that can be used for lining crates, sonotubes, and storage shelves or mounts. The film will resist the passage of vapors together with other gasses and pollutants. Marvelseal® is excellent for lining transport crates when objects are going to be stored in them for long periods of time. The material easily welds to itself and other surfaces by the application of heat. Custom made bags can also be made to completely encapsulate an object.
Soft, cloth material, though abrasive to some surfaces. Good protective layer where soiling may be a problem.
Made from Aramid fibers, they are available in a variety of forms from very soft and fibrous to more rigid. The softer products are generally used for packing museum objects. This is an excellent material for lining cavities cut from polyester foam or Ethafoam®. Nomex's® unique ability to stretch in one direction prevents bunching and folding of loose material within a cavity. Often an object can be compromised when placed in a cavity that is not tightly upholstered due to an increased risk of appendages catching on folded or bunched areas. Although Nomex® has a soft surface, it is also fibrous and should only be used with objects that have smooth surfaces that are not likely to snag or catch on its fibers. It is permeable to air and water; non-dusting, chemically inert and flame resistant.
A material that should not be forgotten because it provides an excellent source of protection. Most packing pads or blankets are cloth with cotton-batten filing and quilted stitching. There are also paper pads or throw-away pads that have a paper cover with cotton or other filling, but are for a single use.
Made in a variety of widths and thicknesses; clear or opaque; will deteriorate after time when exposed to sunlight. It is water repellent and non-abrasive.
An extremely soft material that can act as cushioning in cavities and as loose fill in interior Fomecor® or corrugated plastic boxes. This material, due to its fibrous nature, needs to be used in conjunction with a soft wrap (objects can easily snag if not covered properly).
A soft, felt material that can be used for a variety of applications. It is excellent for lining slots for non-ornate framed works and covering pallets for large sculptures. This material adds minimal cushion and is mostly used to cover wood and other hard surfaces that can damage an object. The material should not be used in slots containing frames with fragile surfaces or against objects with patinas and/or fragile finishes (the felt will buff or shine bronze surfaces). Soft Tyvek® can be used in conjunction with the felt when it is necessary to touch sensitive areas of an object.
Closed-cell foam; waterproof, easy to cut with a knife or saw; has excellent memory when used within the proper cushioning curve. The foam is virtually impermeable to water and has stable chemical properties making it a suitable material for long term storage containers. It has a naturally waxy surface quality. It can be recycled back to the manufacturer.
A durable, non-dusting, closed-cell structured foam that offers very good cushioning properties at low densities. It is chemical and moisture resistant and has a good thermal insulating factor. It is comparable to polyethylene foam in memory, shock, and vibration absorption.
(Astro-Foam®, Micro-Foam®) - Waterproof if properly sealed. Combines positive cushioning properties with low abrasion. This material is similar to polyethylene, the material used for Ethafoam, but it is slightly less dense and has a higher gloss. A recycled product is available. It is chemically inert and non-abrasive.
It is a chemically inert and breathable wrapping material that protects the surface while also providing cushioning. This is an excellent material for soft wrapping paintings and framed works for local or one-way travel. It has a slick outer surface that makes it ideal for interleaving objects (plates, cups, etc.) for one-way travel. This material can be used in combination with polyethylene sheeting when an object needs to be completely sealed and cushioned.
Hard surfaced foam. It has very little memory and is not good for cushioning; better for filler. It is not environmentally sound and very toxic if heated. It is available in sheets usually 4 x 8 feet, and in thicknesses from 1/4 inch. It is a cheaper alternative when insulation is required within a crate. It provides very little cushioning and has a very low memory factor. However, if used in conjunction with polyethylene strips (for cushioning), it can be a cost-effective means of insulating and cushioning a two-way crate. There are polystyrene foams that are recyclable; check with the manufacturer. Almost all polystyrene is now CFC-free.
The PU foams with ester components were developed to meet government codes, and are fire retardant. They are better quality foam, and have a softer, have somewhat of a silkier feel. They tend to last longer as they are more tear-resistant.
The large majorities of polyurethane foams have the ether component, which tends to be more brittle with time, and can discolor faster. It can be cut with a kitchen knife; has a resilience memory; has insulating capabilities; absorbs moisture. It can be recycled, but is not biodegradable. There is a great range in densities available in the ether variety, from very soft too much more firm.
Polyurethane foams typically have one of two other components: ethers and esters. Although the ester variety degrades at a slower rate, both will turn yellow over time, become brittle, thereby losing their initial cushioning properties. Off-gassing is minimal, and it doesn't become particularly acidic over time. It should be stored in the dark for optimal life of the foam. In general, direct contact of PU foams with art objects should be avoided.
(Jiffy wrap, Custom wrap) Lightweight quilted pads. Good for general cushioning of non delicate surfaces; not very effective without supplemental cushioning.
A spunbonded, lightweight polyester fabric made by DuPont. It is very stable, resistant to moisture, and doesn't stretch. It is easy to cut and doesn't ravel or produce dust.
Can be considered polyethylene sheeting, but it has a coating that sticks to itself, and it can leave a residue. It is very good for wrapping things quickly or holding them in place. Used to externally wrap cardboard crating.
A coated paper product, which is available in an acidic form or acid free. It has a very slick surface; very hard; not much will stick to it.
Soft Tyvek is a non-abrasive, gas permeable, non-dusting, water resistant, inert material that is excellent for lining cavities and covering foam pads. This is a relatively inexpensive material that offers some advantages over the more costly lining materials. It is non-woven, and does not have exposed fibers that can easily catch on fragile surfaces. It is a durable material that cannot be easily torn or ripped. Its durability allows it to be used against heavy items that may pitch or slide against its surface. It can be sewn or glued to make good covers for objects being stored. There are some limitations in that it does not stretch and therefore can bunch in cavities, and it has a texture that is not suitable for all surfaces.
Nomex®, Tyvek®, Critics Choice®, Gore-Tex® are some of the brand names. There is a large variety in these materials, from waterproof to absorbent. Most create a barrier, but still breathe. Some are fireproof. Most are very soft, however the softest ones are not waterproof. Cannot be recycled; non-biodegradable.
Offers a non-abrasive surface that, when used in conjunction with polyester batting material, is an excellent lining for cavities. This material is extremely stretchable and can easily conform to the shape of the object and cavity. Teflon's® main limitation is that it is extremely thin and can puncture easily. It is mostly used with light objects with extremely fragile surfaces.
Tissue paper is made from a pulp that contains an acidic component, lignin. Acid free tissue paper does not contain this component, and is made from higher quality pulp. Acid free tissues can also be buffered, which means that a component is added to push the pH of the paper to a neutral or slightly alkaline range. Buffered tissues can help to scavenge acidic materials as pollutants. It is also soft, and is excellent for building up layers on objects to protect smaller areas or to build out areas with protrusions and filling voids on three-dimensional objects. When crumpled, it can provide a bed in which to lay an object, but it does compress.
It is a high-strength barrier and wrapping material. It is mold and mildew resistant. It is lint-free, acid-free, and is resistant to wetting, but it allows transmission of moisture and vapor. Tyvek® crate liner is waterproof; relatively inexpensive and chemically stable. Because vapors can transmit through Tyvek®, its use as a barrier to plywood and/or glue off-gassing, especially in a storage situation may not be the best choice.
An excellent material for very delicate surfaces. It is smooth and non-abrasive. Volara® is an irradiation, crosslinked, closed-cell polyolefin foam. This is from a family of cross-linked polyethylene foams, and is related to Ethafoam. Cross-linking gives a more stable structure and smaller cell structure gives a smoother surface.
* Some items listed are special order and will only used at the clients request. Charges will apply.